FEATURES

OPTIONAL IP MODULE BUILD IN

* 1-chanel video through LAN/WAN
* Multiple PTZ protocol
* Standard MPEG-4 optimized video compression
* Video format support D1/Half-D1/CIF
* Built-in Web Server through IE browser
* Dynamic stream control
* 3-lever user management with password
* Motion detection and privacy zone masking
* Support image frame capture and recording
* Local recording and playback, support MediaPlayer
* Resolution Supported: PAL: 704*576/ 704*288/ 352*288/
;NTSC: 704*480/ 704*240/352*240
* Image rate: Max 30fps, band with 32Kbps~4Mbps
* Network 10/100M Base-T Ethernet* Integration of digital camera, lens, receiver, variable high-speed pan/tilt motor and enclosure
* Integration of the following components: Digital camera & lens: high Res. 18x color or color/B&W, 22x color, 23x color/B&W Multi-protocol receiver: RS-485 P/D Variable high-speed pan/tilt: 0.05°--250°/S pan and 0.05°--200°/S tilt Dome housing: optional indoor in-ceiling/pendant and outdoor pendant Dome cover: 5.9-inch sealed fixed acrylic bubble, clear or smoked color. Vandal proof optional
* On-Screen-Display programming
* 360°Continuous Pan Rotation
* 128 programmable presets, presets frozen optional*
* 2-Hour programmable Pattern*
* 1 programmable timed home position
* 1 presets tour available to call 1 to 8 presets in sequence*
* 3 scan modes: auto scan, random scan and frame scan
* 7 Alarm inputs; 2 Auxiliary Outputs
* 3 selectable white balance: auto on/off, Red-Blue and Magenta-green
* Adjustable or auto shutter speed to optimize light sensitivity
* Adjustable or auto sharpness
* Zoom adjusted programming
* Proportional pan speed
* Auto-focus, manual override
* Auto-iris, manual override
* Automatic 180°flip
* Backlight compensation on/off selectable
* Interface for fiber optics or IP card module
* RS-232 interface for future version upgrade*
* Auto-recognize of control protocol and baud rate, no setup needed*
* Surge protection
* The function is new or strengthened compared with the former version

DESCRIPTION

The LDX-D (version 4.11) Integrated Speed Dome Camera is the integration of digital camera, lens, multi-protocol receiver, variable high-speed pan/tilt and dome enclosure. A complete speed dome is composed of a dome housing, a plastic (clear or smoked color) lower dome (bubble) and a dome drive with a built-in camera and lens. The connection PCB unit is included in the dome housing and the system mother board is inside the dome drive.
The system is noted for its high acceleration rate and smooth, steady motion with flexible presets programming and setup.
The dome driver features an Integrated Optics Package camera and a mechanical/electrical quick, disconnect system, making installation quick and easy.
The Speed Dome System is available as either an in-ceiling or pendant mount (indoor or outdoor) model. The in-ceiling system may be installed in either suspended or hard ceilings. The pendant model mounts directly to any recommended mount, flush to a ceiling, or to NPT female threaded pipe. All outdoor pendant models are environmentally sealed to a rating of NEMA 4X and IP66 and include a sun shield, heater and fan. (See housing pictures of indoor in-ceiling mount, indoor pendent mount and outdoor pendent mount.)
The dome is capable of 360°continuous pan rotation and 92° tilt rotation with auto-flip function.
Up 128 target presets could be setup to see specific target scene automatically after receiving a preset call command or alarm. Frozen preset call is optional to avoid un-useful fast moving scene during preset call up period, thus only presets are displayed one by one on the screen. And sequence tour is available to call up to 8 presets in sequence with user programmable dwell time. A user programmable home position will ensures that the dome will turn back to important preset after 2 to 255 seconds un-activated time.
Built-in 7 alarm inputs will call #1-7 presets automatically in case of alarm, and trigger the 2 auxiliary outputs.
The pattern, which is also called PTZ learning in some countries, enables the user to control the pan/tilt/zoom and call presets within 2 hours, and the dome will learn and save the user’s operation. The user could call up the pattern and let the dome run automatically, just like the operator is controlling the dome.
The On-Screen-Display menu makes it possible and easy for the detailed system programming such as alarm joint-action-control setup, camera parameter adjustment and so on.
The 4.11 version dome will adapt to the controller’s protocol (Pelco-P or -D) and baud rate (2400/4800/9600) automatically, this will shorten the explanation and DIP switch setup time during technical support and installation, and minimize setup mismatch factors between controller and speed dome as much as possible.